RSS
 

Archive for the ‘ford’ Category

Ford 9N Engine Block Assembly Overhaul Procedure

01 Oct

The following publication (26 pages) consists of procedure on how to overhauling the Ford 9N Engine Block assembly. The engine shown here has been tanked (dunked in hot tank of cleaner), decked (top milled off to true up surface), and has been line bored. The crankshaft was recently re-ground. The rods were trued by the machine shop and new wrist pin bushings were installed and reamed. The pistons are used but in like new condition and most valve components  and rings were replaced. This motor apparently had been recently rebuilt by the original owner who passed away. The previous (to me) owner purchased it and drove it home parking it where it sat many years before I bought it. While I got it to run the compression was poor as was the oil pressure. The compression problem was due to rusted exhaust valves and seats (from setting), and poor oil pressure due to a mismatched oil pump and rod caps. On the plus side the sleeves were like new and needed nothing.

The content of the publication including the step by step procedure, tools, and many more.

Source : ntractorclub.com

DOWNLOAD

 
No Comments

Posted in automobile and car, ford

 

Toyota, Ford, and General Motors Wire Harness Installation Instruction

01 Jun

Wiring Harness installation instruction for Toyota, Ford, and General Motors vehicle is presented in the following pdf file. This pdf is taken from the Painless Performance Products, the most up-to-date and easiest-to-install automotive wire harness on the market, even with minimum electrical experience.

This automobile wiring system had been designed with three major sections, they are the engine/headlight group (Includes high beam, low beam, park, right turn, left turn, electric fan, horn, starter solenoid and battery feed,
alternator and alternator exciter wire, distributor, water temperature, oil pressure, and air conditioning), dash group (Includes wires to connect gauges, indicator lights, and switches to their proper sources), and rear light group (Includes tail lights, dome lights  left and right turn signals, brake lights, and fuel sender).

To find more details, here is the pdf file to download (source:painlesswiring.com) : WIRE HARNESS INSTALLATION INSTRUCTION FOR TOYOTA, FORD, AND GENERAL MOTORS DOWNLOAD

 
No Comments

Posted in automobile and car, ford, toyota

 

1997 Ford Ranger Free Service and Maintenance Manual

20 Jan

1997 ford ranger maintenance manual

Ford Ranger Model year 1997 Scheduled Maintenance Services listed in this booklet  are considered essential to the proper operation, safety and performance of your Ford Ranger. We recommend that you also perform the Owner Maintenance Checks listed. These services are matters of day-to-day care that are also important to the proper operation of your vehicle. The recommended lubricants, fluids and service parts conforming to Ford Specifications are available from your dealer. This booklet gives you a place to record the services that are performed on your vehicle so that you can keep a record of when parts should be checked or replaced. Give your Maintenance Schedule and Record booklet to the dealer service manager.

The content of this manual book are divided into some sections, they are the General Maintenance Information, , What Maintenance Schedule Do You Follow?, Normal Schedule, Severe Duty Schedule, Owner Maintenance Checks.

To find more details about the maintenance manual of Ford Ranger model year 1997, download the document from the following source (motorcraftservice.com) :

1997 FORD RANGER MAINTENANCE MANUAL AND GUIDE DOWNLOAD

 
No Comments

Posted in automobile and car, ford

 
« Older Entries